Skip to content

Maki's reader and shortcuts

For what the reader can do overall, see the reader feature overview. For notes on pages, see Chapter notes.

The gear in the bottom bar opens the quick settings panel. At the top sit the reading profile in use and Incognito. Under them are the settings you change while reading: the layout, direction, page fit, a brightness slider and four colour filters (none, gray, sepia, invert), each shown on the page you are on. The rows under them show their current value and open a page of their own:

  • Wide pages, in the single page layout only.
  • Page look: the background (dark, OLED black, white, grey, or Auto, which takes the colour of the page’s edge and eases between pages) and Crop borders.
  • Enhance, see below. Method is a row that opens a list of the methods on this device and on the server, each with a line on what it does or why it cannot be picked yet.
  • Chapters: showing the chapter name when a new chapter opens, auto-advance to the next chapter, Skip recaps, Hide credit pages and scrolling webtoon chapters.
  • While reading: tap zones, the page number, Notes beside the page, Progress rail and Keep the screen awake.

Each page opens in place with a back row at the top. Esc on one of those pages goes back to the first one, and Esc there closes the panel.

The layout setting picks the mode:

  • Single page (1)
  • Double page (2), two pages side by side
  • Continuous (3), one scrolling strip that suits webtoons

Other settings:

  • Direction: right to left for manga or left to right (D).
  • Page fit: Fit height, Fit width, Fit screen or Original size (1:1).
  • Crop borders (C, paged layouts only) trims plain white or black margins.
  • Wide pages (single page layout only): shown whole, split into two pages, or rotated to fit.
  • Tap zones: in the paged layouts, tap or click the screen to turn the page. There are four layouts: Sides (back on one side, forward on the other), L-shape, Kindle (most of the page goes forward) and Edges (both edges go forward, for one hand). The zone size can be changed and back and forward swapped, and while you adjust them the zones are drawn on the page. In Continuous, the zone size sets the height of the top and bottom bands, see below.

In the Single and Double layouts you can also:

  • Pinch to zoom around the point between your fingers. Ctrl and the scroll wheel, or a trackpad pinch, zoom the same way. While zoomed, drag with a finger or the mouse to move around the page. Double-tap zooms in on the spot you tapped.
  • Swipe sideways to turn the page, following the reading direction. Mostly vertical drags are ignored, and a zoomed page pans instead.
  • Turn pages with the scroll wheel. A page taller than the screen scrolls first, then turns from the bottom, and scrolling up from the top goes back. A trackpad swipe turns one page at most.

The mouse cursor hides after a couple of seconds at rest over the page.

With tap zones on, a tap on the bottom third of the screen moves the strip down most of a screen, and a tap on the top third moves it back. A strip of what you just read stays at the top so you keep your place. Space and Page Down do the same, and Shift + Space and Page Up go back.

The auto-scroll button in the toolbar (or A) scrolls the strip for you, at one of ten speeds ([ slower, ] faster). It pauses while your finger is on the screen or the toolbar is up, picks up again after you scroll by hand, and carries on into the next chapter when auto-advance is on. A reader left on auto-scroll with nobody there stops counting reading time and lets the screen sleep after five idle minutes.

Progress rail, under While reading, shows the chapter’s progress as a thin line down the right edge. With the bars up you can drag it to move through the chapter. Reopening a chapter brings you back to where you stopped inside a tall slice, not to the top of that slice, on any device.

Webtoon chapters that open by repeating the end of the previous chapter get a Skip recap button, which jumps to where the new pages start. Skip recaps under Chapters does it on its own.

Hide credit pages, also under Chapters, leaves out scanlator credit, recruitment, donation and notice pages at the start and end of a chapter, and a group’s banner joined to the top of a webtoon slice. Maki looks for pages that repeat at the same edge of nearby chapters and reads their text, so copyright pages, “to be continued” cards, title pages and covers stay. Your files are never changed, finishing the last page shown still counts the chapter as read, and the reader settings show how many pages were left out with a button to show them again. An admin can have Maki find credit pages for the whole library in the background under Settings → Library → Credit pages.

At the end of a chapter, keep scrolling (or pull, on touch) to open the next one. The prompt names the chapter and fills a ring as you pull. With auto-advance off, the end screen shows instead:

  • About how much reading time is left in the series at your pace. Hover the page counter while you read for the same figure plus the rest of the chapter.
  • On the last chapter of a series you have finished, it says so and asks for your final rating, with a one-tap Keep if you gave it a score so far.
  • When you are caught up, a rough span for the next chapter, such as “usually comes in 1 to 2 weeks”, with how sure the estimate is. Never a date.
  • If the next chapter finishes downloading while the screen is open, Read appears. Queued chapters show their download progress.

The bar along the bottom has one segment per page. Segments up to the page on screen are lit. Pages ahead that the server has already upscaled show in a lighter grey. Hover a segment to see its thumbnail. Click or drag to jump; the page changes when you let go. In right to left reading, page 1 is the rightmost segment. Bookmarked pages are flagged on the bar. Press T to open the page thumbnails strip.

Enhance sharpens soft pages. Its controls are on the Enhance page of the settings panel: Enhance (Off, Auto or Always), then Method and Don’t enhance once Enhance is on. While the server works, Upscale progress and Whole chapter appear only with a server method. Hold H, or the compare button in the top bar, to see the original page. See Page enhance.

A reading profile is a saved set of these settings, managed under Settings → Reading → Reader profiles. A profile can apply automatically to one or more series types. Types no profile covers use Default, which you can edit too.

Maki picks the settings for a series in this order, and the first one that is set wins:

  1. The override you saved for that series.
  2. The profile you pinned to the series.
  3. The profile for the series’ type.
  4. Your reader defaults.

The chip at the top of the reader’s settings panel shows which one is in use. Click it to change it: the list offers Auto (labelled with the profile it picked, or my defaults), each of your profiles, and Just this series. The line under it says what your next change will touch: this series only, the profile in use, or your reader defaults.

Incognito, next to the profile chip, stops recording the current session.

Press ? in the reader for the list. Keys are ignored while focus is in a text field, and combinations with Ctrl, Cmd or Alt are left to the browser.

Key Action
→ Next page. Reversed when reading right to left.
← Previous page. Reversed when reading right to left.
Space Next page. In Continuous, down a screen.
Shift + Space Previous page. In Continuous, up a screen.
Page Down / Page Up In Continuous, down or up a screen
A Auto-scroll on or off, in Continuous
[ / ] Auto-scroll slower / faster
Home / End First page / last page
1, 2, 3 Single page, double page, continuous
D Switch reading direction
C Crop borders on or off
E Enhance on Always, or back to what you had
+ (or =) / - Zoom in / zoom out
0 Reset zoom
F Full screen
T Page thumbnails
B Bookmark this page
, / . Previous / next bookmark
H (hold) Show the original page while the key is held, if enhancement is on
Esc Back to the page you opened the chapter from, such as Home or the Library, or the series page after a reload or a link. Outside full screen only, since Esc leaves full screen first.
? Show or hide the shortcut list